Shopping Cart

0 item(s) in cart/ total: $0    view cart

Wilt-Pruf Application instructions for Winter Protection

Posted by John Graff on 11/1/2018

I have included a few tips/reminders plus a Wilt Pruf from Better Flora brief discussion of coverage calculations which I hope may help make this a smooth process for you.

Application:

  1. For Winter Protection the dilution rate is 1:5 yielding 6 gallons of application solution for each gallon of concentrate.
  2. Mix Wilt Pruf by adding Wilt Pruf concentrate to water
  3. Allow 2-3 hours for drying in daylight ( not necessarily sunlight) when temperatures are 32 deg. F or higher.
  4. In the Winter months Wilt Pruf will remain on your shrubs for 3-4 months, it is best to spray later in the season to insure good protection for January and February.

Application solution yield:

1 Quart concentrate yields 1.5 gallons of solution

1 gallon yields 6 gallons of solution

5 gallon bucket yields 30 gallons of solution.

Coverage calculation:

The best way to calculate coverage to determine the amount of solution needed is to test spray one shrub with water and then multiply the quantity used by the number of similar shrubs.

If testing is not practical, a rough guidline that can be used is that 1 Quart of solution will cover the average 5-6' Christmas Tree. Estimate the size of your shrubs compared to a 5-6' Christmas Tree, Then multiply by that factor. For example say I have 40 hollies, to me they look to be about the 1/2 the size of a Christmas tree so:

1/2 quart X 40= 20 quarts or 5 gallons of solution needed.

From the table above I see that 1 gallon of concentrate yields 6 gallons of solution so it is probable that 1 gallon of concentrate would be adequate.

If you need help with estimating your projects requirements, feel free to contact us at support@better-flora.com or call us at 1-800-324-0705.

Wilt-Pruf concentrate:

We have a large stock of all sizes available. Our prices are unchanged from last year.

30 gal and 55 gal drums